Newest technology SMD ultra high output flashlight. Cures Solarez resin with the correct wavelength. Typically cures Solarez resin in 30 seconds or less. To reduce resin shrinkage and yellowing you can attenuate the light by moving the flashlight on and off the project.  

UV 385nm
5Watts
Reduce Shrinkage
Increases Bond
High Output
Good For Long Hours

SPECTRUM

Unlike broad-spectrum fluorescent tanning lamps or mercury vapor UV lamps, UV LED flashlights are very specific. Their wavelength varies by only by ±5nm. If they are 365nm, the only put out 360nm - 370nm (NOT 385nm). If they are 395nm, they only put out 390nm - 400nm, (NOT 385nm). If they are 405nm, they only put out 400nm - 410nm (NOT 385)

SOLAREZ resins require 385nm to cure properly. If you use a 365nm flashlight or a 395nm or a 405nm, you may get a tacky surface cure or perhaps inadequate adhesion to the base or sometimes a liquid vacuole may appear. All aberrations associated with improper lighting


INTENSITY

The old-style "bulb-like" LEDs from the 1980's or '90's are obsolete compared to today's SMD (sheet mounted diodes) style chips. They GREATLY exceed the bulb-style lights output, no matter how many of them you have i.e. you can have a bulb-style LED flashlight that has 64 bulbs and still not have nearly the intensity as a single SMD LED.